3d Term, Week 8 🤩⚓️

8th – 14th of March 2021

There we were after a good weekend of rest in Eemshaven, we were ready for the steel coil party on Monday morning!

Probably because we were so close to the office, and perhaps for other reasons also, a lot of persons came to visit us. I say « us » but for sure it was more for the ships and to see what was going on, and how operations were going too. It is funny because you can recognize them easily. After all, their safety jackets and boots are very nice, shiny, and clean! Oh well, I cannot blame them, they do not need to wear them in the office behind the desk right? The funny thing is that of course they apply the safety rules by the letter and wear the helmet at all times… also inside. Personally, I find that sometimes wearing a helmet is more in my way than normal. I often forget that I have that extra space that I need to take into account and I find myself bumping my head way more often than usual. Haha. Also..; I am not so sure that a helmet would be of great aid if a 20-ton steel coil came to fall on my head…. But that is of course another debate.

There was a big crane that was hired for transferring the coils from one ship to another. We had also a few extra persons onboard.

Cargo transfer from one vessel to another
We are now almost equal freebords!

We had to make sure that a few of the bigger coils that were above 25t had to be on Portside because the crane in Szczecin did not have an arm long and strong enough to take those coils out from starboard. As long as we knew; it was not a problem. Because this was a particular case, two super-cargos from the office were onboard the ships to make sure there would be no damage and an inspector from Tata steel was also onboard making sure that the cargo would be again properly stowed from one ship to the other. They had all the plans and were mainly leading it all. I was making sure that the new captain was happy, that there was enough coffee and that the ballast was correctly taken out of the ship and stripped. I remember the new captain was slightly nervous to have the ship properly stripped and I found it strange that he asked me a few times to strip again « just in case ». Which I did of course – captain’s orders- but felt a bit hurt of course that he would not trust my deballasting and stripping of the tanks. But they were good empty so; I had nothing to be afraid of.

The deballasting goes perfectly well!👌🏻

It was fun to see that we arrived in ballast so we were more than 2 meters higher than our sistership and that slowly slowly we were at the same height and finally ended up being the one loaded and them in ballast 2 m higher than us! As I was regularly checking the drafts it was fun to see. Also, the nice thing is that we were at the very end of the harbour so the quayside was also accessible ahead of us with a small jetty. We could really check the bows of both vessels. I made a couple of nice pictures too of course! Also crazy selfies – but that is not a surprise for you, right? 😉

It took us over 2 days to transfer all the coils, and we were almost going to start day 3 of loading but we managed to do a little bit of overtime with the crane driver to have it completed at the end of the second day. I was glad about that because it enabled us to leave directly in the evening rather than losing again half a day. We have still 3-4 days till our destination port of call and well you know; Eemshaven is nice but there is not much to do without a car there.

The two sister ships alongside each other; Ruyter is loaded, Sprinter in Ballast.
A fully loaded cargo hold with steel coils.

While underway we heard that we would not be heading back to Hamina for the next voyage, but it would be Riga with some bulk cargo. We had to face the now the other part of the timber slings: storing them away hoping we would not have to take them out for a while…. Indeed it may seem stupid but a few trips ago we were hoping that we would have a few backs and forth trips with timber which meant that it was easy to just drop the lashing equipment in the hold while sailing in Ballast from Germany back to Finland. Up to now, it hadn’t really happened this way. But we had managed to leave the slings on deck in what we call the « swimming pool »: the area just in front of the accommodation. It is not ideal, but properly covered and fixed to the deck it was not such a problem. Just looked very messy. But you know, who cares if it is only for a couple of days.

This time we decided to store them back in the lashing store in the forecastle. Which meant tidying up and rolling all the slings properly, folding all the tarpaulins and bringing them back and counting all the timber slings, putting them by bundles of 25, and dropping them off via the hatch and the crane forward. It was almost as much work as making the deck cargo fast! Haha but you know what? This time, we had time to clean up the lashing store beforehand and I made sure that all the slings were together in one place and all the tarpaulins together in another place. That was a good job to be done together.

Putting away all the timber slings together with the AB’s

Half a day later we passed Kiel Channel during the day. It is my favourite when it is during the day because I find that there is always something to see. And I must admit that it was also good weather so it makes it even more enjoyable. After Kiel Channel, we still had 2 days sailing to Szczecin, our discharge port. Although they work fast there, we did not manage to complete it in one day and they do not work on weekends and nights there so we had a weekend in the harbour! Lucky enough for us we were allowed to go ashore!

I was looking forward to walking a bit but also to visiting this city. I spent a good part of my Sunday walking around the streets and going from one iconic place to another. I found that some parts of the city were really cute and well taken care of and the buildings were big and nice in other parts. All around the city, some panels indicate the direction and the time by foot to go to a « viewpoint » on the river to a landmark, or a museum, or a pretty fountain… It felt like they were trying to improve tourism there and make it attractive. I was really glad I had the time and that just the moments I was out, the sunshine was with me. It was my little architectural and tourist break. Very well appreciated as this was my first time there too.

When I was on tall ships, Szczecin was a big sponsor of the Tall Ships Races. One of the regattas even ended or started there; I do not recall really. But they were investing in a lot of polish youngsters to go at sea and experience some life onboard big sailing vessels, making friends and learning how to live together and be more understanding. They would also sponsor a lot of other youngsters all over Europe for this same sailing experience. Yes so I had heard about Szczecin quite a lot but it was my first time here and was nicely surprised.

A free Sunday afternoon in Szczecin

On Monday we would finish the discharging and prepare the hold for our next cargo in Riga. It was not a long sail there so it was going to be a good week. I was soon going home as I had just finished my 8th week onboard to probably after Riga!

We will see when that will be but For sure you will know soon enough in the next coming days!

And off I go for a nice walk in the city! Free days = Fun days!

For now, I hope you enjoy a great Sunday too!

Xxx Sophie

3d Term, Week 7 🤩⚓️

1st- 7th of March 2021

It is already the beginning of my 7th week onboard! Time flies! This means I have already done 3 quarters of my term…. And I have only 2 weeks left… more or less depending on the harbours and where we will be: if it is easy or not to have a crew change according to the amount of time we stay in the harbour and the available flights and connections. I usually know a small week ahead of when the crew change will happen. But I still have quite some time to go. Captain H. He will be leaving soon. He is leaving in the next harbour and captain R. Is already onboard with us. Is it like we have two captains now? No. Only on of course but as he is new onboard and we are supposed to be sailing the following trips up and down with timber and it is still ice sailing conditions, Captain H. thought it was wise to have him on board a couple of days earlier to do a proper handover and make sure his vessel would be taken care of. Indeed As I said earlier in previous posts, Ice sailing is quite particular. You have to make sure you do not run full ahead into ice banks or you will damage the propeller. You also need to make sure you do not ballast for example all the way to the top so that the water overflows on deck and remains in the pipes. In this case, you will for sure damage your pipings and tanks because the water will freeze and expand. In freezing situations, you always make sure that you ballast a few minutes less so that there is room for expansion. On deck, you want to make sure that you do not get too much spray because, with our speed and the wind, it will turn directly into ice on deck. And this creates an extra unwanted weight onboard that cannot be removed so fast. This can be quite dangerous if it is not taken care of. If you listen to captains you have experience in this matter, they will always say that it is better to shelter, change course or delay the trip a few days if spray on deck becomes too dangerous. Of course, I totally agree with them!

Sailing with deck cargo: the timber is lashed on deck with strong slings

So yes Captain R. Came onboard slightly earlier for ice conditions and timber cargo experience. I must say, it is not because you are a captain for years that you have all the experience in all different cargo types and sailing in all the areas. Some ships never sail in ice and rarely have timber for example. I think it is wise to make sure that your reliever feels at ease when you have 2 red flags hanging above your ship: ice and timber. But of course, you lust think that too: better safe than sorry.

Captain H. Was going to leave in the next harbour in Brake. I never really like it when a crew goes home. I mean, of course, I am happy for them, but I enjoy their presence and I know for sure that with the dog gone, it would be quieter too. On the other hand, I do enjoy meeting new people… even if I find myself usually a bit nervous. I always think I have to prove that I am worth it, that I am good at what I do and that I take care of things, that I work hard…. And I must admit that it does stress me a bit. I know all captains are different and when I do not know them yet then I have to adjust, ask, test and see how they want it. And it feels to me that although I am home – in my second home- I have to change to please the new captain. Usually, they say « oh do not bother for me, just as you usually do… » but then come up with a full list of things that they want to be done differently. Haha. I mean it is never as bad as I make it sound but I have the feeling I am always nervous with new captains. Like if I didn’t like change; or like if my safe environment suddenly is not safe anymore and I have to recreate a new one all over again.

Early morning alongside in Brake, ready to start discharging deck cargo.

Anyways. This was the last trip for Captain H. And the first for captain R.

After w a few days sailing through the Baltic Sea then the Kiel Channel, w arrived in Brake and started the usual discharging process. hooks and chains off, slings off, tarpaulins off and timber away. The crew made it ready upon arrival in the night so that I could start in the morning with the discharging of the deck cargo. I am the one in charge of the cargo operations so I wake up early in the morning for that while the rest of the crew continues sleeping. Rest is well deserved because taking off all the chains and wood and tarpaulins is not a small job to do in the middle of the night!

In Brake, discharging the timber till late in the night

The mornings in Brake are always very peaceful and quiet. It is not a busy river and the fresh air is just there. On top of that, there is the smell of timber! It is a very nice cargo to have onboard. When you open the hatches, it comes up to your nose and it seems you are back in the Finish countryside on a holiday in a cabin far from the world, just coming home from a long walk outside and preparing yourself to sit with a cup of tea close to the fireplace and make your self cosy…. Oh well, I guess you can imagine the loveliness of the smell….

The last packs of timber before a good sweeping and mopping to dry the hold for our next cargo.

The next voyage finally came in the email and surprise! It was not Hamina! Of course not… We are « promised » a few trips of timber up and down and we finally manage to get into the right systems and tips and tricks and out. The office decides else wise. Oh well. I wonder if we will go back after again or if that was it for the ice sailing of the year. I have the feeling that was it and I should have enjoyed it a bit more…. Haha. Next year… maybe.

This time we were not going very far. Just from one river to the other: Eemshaven. We would get the cargo of another sister ship that got a technical problem. Oh! Actually, that is also interesting! And I do enjoy meeting the other sisterships around! I find it always fun to compare them and either be proud of our ship or take notes on how they do things… Not that I am not very proud of the ships I work on, on the opposite! But most of the time, people tend to forget how far some ships have been coming from and that a whole makeover takes time.

So there we were, after saying goodbye to captain H, we headed to The Netherlands and arrived just before the weekend started…. Which meant a full weekend in the harbour. Perfect to go for a walk and rest. Well, a walk is pretty much the only thing you can do in Eemshaven if you do not have a car… because where we were there was literally nothing except windmills haha!

We came alongside our sister ship and as they were loaded and we were in ballast, it was funny to be the same but at one high above. When their discharge would be complete, it will be the exact opposite. They were coming from another dutch harbour and their cargo was steel coils. These coils had to do to Szczecin in Poland. We would make sure that this would happen off course. A few coils had to come out because they were expected earlier so trucks were arranged to pick them up on Monday so that they would be on time for the client in Poland. The rest would go in our hold.

We were ready for Monday where all the craziness would start.

Ruyter alongside her sister-ship Sprinter in Eemshaven.

Our sister ship was very nicely maintained. There was probably no rust anywhere… and their decks seemed really perfectly painted. Our decks in the aft were still red from the old colour and because they would be descaled and painted from scratch later in the summer, they did not look as perfect. They had even carpets to walk on outside to make sure we would not bring dirt on the ship from outside! Or maybe it was also not to slip on deck…. Fresh paint and water can be very slippery.

Our neighbours were very kind. They invited us for coffee and we did the same of course. Their bridge was not as nice as ours and slightly differently arranged. In our PS wing, we have our little kitchen area; they had a space; their kitchen area was midships. They also had a fixed chair for steering and their office corner was on the Sb wing with two screens. I thought our bridge was cosier. But hey! Unless you are the very first owner and choose the style of your bridge, you get what you get right?

Enjoy a nice weekend and Sunday in the harbour and see you Monday for the next adventures with the steel coils!

Xxx

Sophie 

2nd Term – Week 7. 🚢 ⚓️ ⭐️

This week, I got older. Yes indeed, Monday I had another birthday 🥳 on a ship. Soon I will be able to count more birthdays at sea than at home! No… probably not just yet. What I like about birthdays at sea is that the cook usually always makes a birthday cake 🎂! Well, I also know that the captain usually goes to the cook after a meal to tell him my birthday is coming up and that it would be nice if he made a cake for me… haha! I do not mind!

Ruyter moored in Kotka, Finland

This time it is funny because Captain told him last Saturday ( I overheard him 😉 ) and he made a cake for the following day! But the captain said: “no! Her birthday is on Monday!” So he put it back in the fridge. The funny part is that Sunday he showed it to me in the fridge: “chief chief! Come and see”… but I quickly closed my eyes saying it was a surprise and that I would wait Monday to see it and blow candles … But of course, ship happens, Monday we were in the harbour in Kotka ( Finland 🇫🇮) and it was a very busy day…. I wanted to blow candles together with everybody, and due to cargo operations we were never at the same time in the crew mess, so we waited the following day at dinner time! 🍰

The 19th is my Birthday! And I love cake 🙂

There is always a good reason to have cake onboard, but a birthday is always a special day. This time cookie was telling the captain that he didn’t know how to bake a cake, that he was a cook and not a baker. I am fine with any cake. People who know me…. Well “know”. Even if you don’t, you can just see it on my body, right? ;p #sweettooth

Kotka. Loading fertilizer. The same place and same fertilizer we loaded last year (beginning of November 2019). The last trip of my internship as the sailing was suddenly interrupted in the second locks in the Kiel Channel with a sudden engine explosion 💥…. We were all keeping our fingers crossed that this year our navigation to Delfzijl would be without any trouble 🤞🏻.

Ruyter entering the Kiel Channel locks in Holteneau

The fertilizer we load here in Kotka is UREA. Last year I had a bit of an allergy to it… They say it is not harmful but sometimes I doubt it… the next morning my face was all puffy. Luckily this year only my eyelids were, so I was still recognisable by my colleagues!

Urea Fertilizer

Sailing to Delfzijl 🇳🇱 is interesting. Not the navigation part, but the loading part… The vessel needs to be even keel as she goes through the very narrow sea locks upon arrival. 5,00m draught. Not more. This means that the loading needs to be very precise to be a few centimetres on the stern (we will burn fuel with a 4-day sailing and those tanks are situated on the aft part of the vessel). If we are not even keel, the chances are that we will get stuck somewhere in the locks. We also need to go in with high water, as at low tide there is not enough water (obviously 🧐). That is only a matter of time scheduling with the harbour master and pilot that needs to board the vessel for the inshore channel part.

Passing through the bridge in the inshore channels of Delfzijl

To be even keel when the loading belt drops 700t/h fertilizer in your hold and when the chances of rain are high doesn’t make the task as easy as it seems. Urea cannot afford to be wet: one drop of drizzle, the hatches need to be closed immediately. Fertilizer melts and when it dries out and it hardens which makes it very difficult to get rid of. We will see how it goes next week with the cleaning of the hold! It also makes the rails of the coaming very slippery and it is therefore very important to keep a very close eye on the trim of the vessel while loading so that hatches can be closed at all times. Well, this time there was a thin layer of fertilizer on the coaming and while I was closing hatch 9, I couldn’t move forward anymore! 😰I felt a bit of pressure and thought to myself: “oh no! is this happening now as we only have 20 minutes of loading time left and rain is soon coming? “Really??”. Luckily the captain was also on deck at that moment and heard me struggle with the wheels of the crane. He put a bit of sand and tried pushing but it didn’t work (sometimes a small push helps) but nothing moved. We did not have a big trim but it was still too slippery.

Fertilizer being loaded at a speed of 700tone per hour

In the beginning, I thought: “ Could this be ice on the coaming?”. It was only 2°C outside but felt like -3°C. No, it was the very thin layer of Urea dust. In no time the engineer and captain took two strops and the chain block and the crane ended up moving very smoothly like if nothing had happened. I must say my heart was beating a bit faster as the pictures of damaged cargo – so close to the end- were popping up in my head…. Shush pictures! We win. The crane moves, we close hatches and the rain only comes later.

Kotka harbour

It was nice to be back at sea for a few days again 🌊. I like to get into a routine sometimes: when my Marad jobs are done and I am up to date, it is very satisfying to be able to relax on watch and do some maths ( yes yes, maths exercises… without calculator…) and to read 📚. I finally had time to finish a great book (“All the Light we cannot see”) that one of my favourite Danish bosun offered me 5 years back. Thank you Peter J.!

Underway with finally a bit of calm sailing in the Baltic

We sailed through the Kiel Channel – once again- at night – once again (I know the routine by now and expect a 6 hour night watch instead of the usual 4, but that is the sailor’s life, and I do not mind!) and arrived t the sea locks in Delfzijl at 3 am on Friday. There also was a long night. As the captain was having a way longer time in the bridge, I offered to come earlier so that he could have a short 2-3 hour sleep before the tricky part of the river, the narrow locks and the channel. I think it is nice, also as captain you need your rest! Besides, Saturday afternoon and Sunday were then off as the discharging will only start on Monday morning. I would have time to catch up on some rest and do something else later! 🙂

Chief officer ready to moor in Delfzijl!

A Saturday afternoon filled with 2x 5km walk (back and forth to the city centre) and a small stop in a second-hand store where I found 7 chick books in Dutch… yes! To practice my dutch! And a few ingredients to teach cookie how to bake a carrot cake 🥕- better than the one from Starbucks!- my favourite cake. The agreement is that he would then teach me how to make sambal 🌶 and an Indonesian speciality ( also a cake… sweet tooth remember? 😉 )

His vegetables are really growing in the galley. It is cool to see and it reminds me of our lupine garden in the Bridge in my previous term! 🌱

The cook’s small vegetable garden in the galley…

A calmer week as you can see, but good to charge those batteries for my next 2 weeks left!

See you next week! Xxx Sophie 😘 ♥️