15th- 21st of February 2021

Hello! And… another week in Sophie’s adventures onboard Ruyter! Yeah! So as you guessed most probably with my hint from last week, our « promised « Hamina-Brake » trips lasted for 1 trip for now! We were indeed sent to Sluiskil to load fertilizer to Riga! For a change! Maybe from Riga, we would be going back to Hamina…. Hopefully. I honestly kind of liked that all icy timber loadings and…. Not that I am getting « hooked » to it yet, I like to have a cold and freezing winter and a nice and warm summer. So that our trips differ from summer to winter. Indeed. As we are sailing in the same waters all year long, I like to have a few differences in the scenery. It makes a known place look oh so different when it is cold and covered in ice and snow, or when it is all green and sunny glasses are required…. Do you follow what I mean?

Or maybe it was the idea of having to clean the cargo hold again after fertilizer. And let’s admit it. With timber you only need a good sweep because it is clean cargo, and washing the hold in winter is a hell of a lot of work because it doesn’t dry as fast as in the summer: you really need to use the squiggly very well, and mop the tank top as good as you can so that hopefully with the air dryer it will all be ready for hold inspection in the next harbour.

But it is ok. Fertilizer it is. Washing the cargo hold is fun, and is also part of the job. At least it is not paperwork…. Although I do not really mind paperwork.

Ok so here we are on a busy busy Monday in Brake: finishing the discharge of the timber, cleaning the hold and preparing it for the next cargo (angle tarpaulins to prevent the cargo to come behind the bulkheads, giving it a good wash for the inspectors and closing everything (speed locks and wedges) for the ultrasonic test we would get.

Oh and of course, as it usually happens when we are close to The Netherlands: food delivery! We get our food and ship provisions from Ship2supply in Delfzijl and after a few years we got to know them well and it is always a pleasure to see their truck parking close by to our gangway… ok ok. Not only for the good food, fresh fruits and vegetables we are getting on board but mainly for the crate of cookies! Haha joking. It is always nice to see familiar faces coming on board.

I was very glad we had our good walk the day before because Monday was quite rainy: happy we were discharging timber, so not a weather-sensitive cargo! It seemed that the rain kept following us for the next days after that.

On the north sea all the way to Sluiskil, where we had to wait a few days alongside without being able to load due to «conjecture»…. Because of the rain of course. Everything seems to stop with rain. I can understand but yeah. A bit frustrating, also when you cannot go ashore. But that is the way it is.

On our way south in the north sea; it was pretty cool: during dinner (why does everything tend to happen during dinner or coffee breaks right?), I had a helicopter call on VHF 16. It often happens that they want to practice boarding a ship so they call us to ask permission to train on our ship. Up to now, I have never had a captain saying he didn’t allow it which is quite cool. It feels like «something is happening onboard» when they are there.

I like helicopters in general. Also on land, if there is a military show with helicopters, tankers and all sorts of cool stuff, I am always one of the first ones asking if I can have a look inside and If I can sit in the pilot’s chair…. Are you not? I always think that what is unusual and not so common can be fun and interesting.

So there was the helicopter drill onboard the ship. Finally a bit of « cooler » on this grey and wet winter day. It was almost dark outside and quite windy too so I suppose it must have been good training for them!

Passing the locks in Terneuzen, weren’t alongside directly after the locks on the waiting berth to have the hold inspection done: Ultrasound test, an inspection of the hold and the bilge. All good. As usual.

They say the hold surveyors from the yard are tough ones and that they are always picky. I have had only once some discussions with some about our rubbers and a speed lock they found was not tight enough for them… ( really?) All the other times it went smoothly. But I still sometimes have that knot in the stomach thinking: will it also pass this time? And it does. I should not worry. I am a Sophie so I do: in my opinion, if it doesn’t pass it is because I was not precise enough in my job and in cleaning and supervision the end result …

They also say that they will be less picky if they have a lot of ships waiting and conjecture; and pickier if their cargo is not ready…. That is the game in shipping: trying to win time for who will be paying what in the end. If they say the ship is not ready and the hold was not accepted, then the ship cannot issue the notice of readiness and the timer doesn’t start…. Do you get it?

The way an ultrasound works is by having all the hatches closed, speed locks on and wedges too. One of the surveyors put a box in the middle of the hold and another one goes around all the hatches with a headset and a tool that looks like an antenna. This way they measure by the number of frequencies passing through the rubbers if there is a « leak » or not. If they aren’t any leaks: all good; if some are found then we need to fix them. simple. 

As soon as the ship that was still in our berth left, we shifted to the Zijkanal C where we would be loading. Luckily we did not have to wait as long as predicting and that same evening we started loading; hatches by hatches has it was still quite grey and cloudy outside…

It is important to keep in mind the time that it takes you to open or close the hatches; the loading process: if it is by truck, by belt, by crane because this means you cannot decide directly if you want to close the hatches, you might need to wait until the belt is empty which can take a few minutes sometimes…. The cranes are usually the easiest in case of bad weather because they go grab by grab and you can pass in-between and start closing in some places where the hatch cover crane is for example. And the other thing you need to be very aware of is your trim: you cannot use the hatch cover crane in all situations. If your trim is too big it can become very dangerous to drive and let’s say there is slippery cargo on the rails…. It doesn’t help at all.

The even hatches at the top hatches, the uneven ones at the bottom hatches. This means that we cannot open the bottom hatches before the top ones. For cargo operations, this implies that we can have either 1 hatch open or 3 in case of bad weather, but not « just two »….( except for hatches 1 and 2 and hatches 8 and 9 😉 )

Sometimes the equipment they use for loading can handle with just one hatch open: very handy like that we do not have to stop all the time, and it is opened and closed way faster. We are there to load right? 

This time they had a pipe that could turn around quite well so with only one hatch open we could reach under half of the other two hatches next to the open one. And the rate was also fast so it is nice too. You do not have the impression that nothing is happening!

Less than 24 hours later we were out at sea again: through the locks in Terneuzen and off with the pilot in front of Flushing and out in the North Sea. Great! I like it when it managed to stay dry just the time we need to load. The harbour because touch and go. I like being long at sea; I like also being a few days in harbour, but only when we can go sightseeing and for a walk so…. This time we couldn’t better sail again! Haha

A little over 24hours we were already at the locks in Brunsbüttel. Again a bit of luck to have currents with and some easy times for the locks and pilot changes on the channel. Usually, it is always in the middle of the night and some always have to stay longer for the locks or have to come up earlier for the pilot change. It rarely happens that it is similar to our watch system… but yeah we have to go through anyways right?

And finally, finally, we got our routine schedule back sailing all the way to Riga fully loaded with fertilizer.

Sometimes I wonder…. Yara is Finnish, but there is also fertilizer in Russia or almost every harbour in Finland…. Why bring it all the way from The Netherlands? I mean I know they are not all the same fertilizers…. But I find it strange sometimes that cargo goes back and forth… imagine how pointless it would be to bring back and forth the same cargo right? I say that, but I am certain it actually does happen with steel coils or wood or wood pulp too! I wouldn’t be surprised!

But okay… I am not sure and I think I would rather not know. It would make my job a bit pointless.

I am glad we could finally catch up on some sleep and some rest with these few easy sailing days. Because after Riga we would probably go back for the timber (so hard work with lashing again) or have short icy trips in the baltic…. We do not know yet!

Let’s dream of another easy sailing trip…. And I will see you next week!

Ciao ciao!!

Sophie xxx